BSPMX - 1013 INT/EXT POLY HG ENM SAFETY RED

  • MSDS: BSPMX
  • Manufacturer: RICHARD'S PAINT MFG CO INC
  • Product Name: 1013 INT/EXT POLY HG ENM SAFETY RED
  • National Stock Number: 8010-00F031972
Product Identification

Product ID:1013 INT/EXT POLY HG ENM SAFETY RED
MSDS Date:02/02/1989
FSC:8010
NIIN:00F031972
MSDS Number: BSPMX

Responsible Party
RICHARD'S PAINT MFG CO INC
200 PAINT STREET
ROCKLEDGE, FL 32955
US

Emergency Phone: 407-636-6200

Info Phone: 407-636-6200

Cage: RICH1

Contractor
RICHARD'S PAINT MFG CO INC
ROCKLEDGE, FL 32955 US

Telephone: 407-636-6200

Cage: RICH1

Ingredients

XYLENE, DIMETHYLBENZENE, XYLOL

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: <5%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM, SKIN

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


AROMATIC PETROLEUM DISTILLATE, HEAVY STRAIGHT RUN NAPHTHA C

CAS: 64741-41-9

Fraction By Weight: 75%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM


3.76 LB/GL OR 451 G/L

RTECS: 9999999VO

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: RESPIRATORY TRACT
IRRITATION. EYES: SEVERE IRRITATION. SKIN: IRRITATION & DERMATITIS.
INGESTION: GASTROINTESTINAL IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: DIZZINESS, BREATHING DIFFICULTY,
HEADACHES, LOSS OF COORDINATION. EYES: TEARING, REDNESS, BLURRED
VISION. SKIN: DRYING, DEFATTING, CRACKS. INGESTION: VOMITING,
NAUSEA, DIARRHEA. ASPIRATION MAY CAUSE CHEMICAL PNEUMONITIS &
PULMONARY EDEMA.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. IF BREATHING STOP, APPLY
ARTIFICIAL RESPIRATION. EYES: FLUSH W/PLNETY OF WATER FOR 15 MINS.
SKIN: WASH THOROUGHLY W/SOAP & WATER. INGESTION: DON'T INDUCE
VOMITING. ASP IRATION HAZARD. OBTAIN MEDICAL ATTENTION IN ALL
CASES.

Fire Fighting

Flash Point Method:TCC
Flash Point:107F
Lower Limits:0.7%
Upper Limits:7%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:WEAR RESPIRATORY EQUIPMENT. WATER SHOULD BE
USED EXCEPT AS FOG TO KEEP NEARBY CONTAINERS COOL.
Unusual Fire/Explosion Hazard:HANDLE AS A FLAMMABLE LIQUID. VAPORS FORM
AN EXPLOSIVE MIXTURE IN AIR BETWEEN UPPER & LOWER EXPLOSIVE LIMITS
WHICH CAN BE IGNITED BY IGNITION SOURCES.

Accidental Release

Spill Release Procedures:ELIMINATE IGNITION SOURCES. PROVIDE GOOD
VENTILATION. COVER W/INERT, ABSORBENT MATERIAL & REMOVE TO DISPOSAL
CONTAINER.

Handling

Handling and Storage Precautions:USE NON-SPARKING TOOLS WHEN HANDLING
THIS MATERIAL. AVOID HOT METAL SURFACES. USE IN WELL VENTILATED
AREAS. KEEP CONTAINERS CLOSED WHEN NOT IN USE.
Other Precautions:TOOLS USED W/THIS MATERIAL SHOULD BE MADE FROM
ALUMINUM, BRASS OR COPPER. PLASTIC UTENSILS SHOULD NOT BE USED.
SMOKING IN AREA WHERE MATERIAL IS USED SHOULD BE STRICTLY
PROHIBITED.

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED CARTRIDGE RESPIRATOR SUITABLE
TO KEEP AIRBORNE MISTS/VAPORS BELOW TLV. WHEN USING IN POORLY
VENTILATED & CONFINED AREAS, USE A FRESH AIR SUPPLYING RESPIRATOR
OR SELF-CONTAINED BREAT HING APPARATUS.
Ventilation:GENERAL MECHANICAL OR LOCAL EXHAUST TO KEEP CONCENTRATIONS
BELOW TLV. EQUIPMENT SHOULD BE EXPLOSION-PROOF.
Protective Gloves:IMPERMEABLE
Eye Protection:CHEMICAL SAFETY GLASSES, GOGGLES
Other Protective Equipment:FACESHIELDS, IMPERMEABLE APRONS, HEAD CAPS,
EYE WASHES & SAFETY SHOWERS
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:286-405F
Vapor Density:>1
Spec Gravity:0.9
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:INSOLUBLE

Stability

Stability Indicator/Materials to Avoid:YES
ALKALINE MATERIALS, STRONG ACIDS, & OXIDIZING AGENTS
Stability Condition to Avoid:EXCESSIVE HEAT, HOT METAL SURFACES, OPEN
FLAMES & OTHER IGNITION SOURCES, CORROSIVE ATMOSPHERES, EXCESSIVE
AGING
Hazardous Decomposition Products:CO2 & CO

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE &
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.